Cement for productio of dry mortars and construction adhesie

Cement without additves, CEM I 42.5 R, is obatined through the grinding process of high-quality  portland cement clinker with addition of an optimum quantity of gypsum.

CRH Serbia recommends this type of cement for production of dry mortars.  All properties of fresh and hardened concrete are in conformity with approprriate standards and have been confirmed through practice.

Type

  • PC 42,5 R
  • CEM l 42,5 R

Cement quality Codes and Standards

Cement without additives, CEM I 42.5 R, is obatined through the grinding process of high-quality  portland cement clinker with addition of an optimum quantity of gypsum. CRH Serbia recommends this type of cement for production of dry mortars. All properties of fresh and hardened concrete are in conformity with approprriate standards and have been confirmed through practice.

Cement type CEM I 42,5 R – properties

  • High early strengths
  • Excellent final strengths
  • Compatible with chemical additives
  • Enables faster construction, with reduced production costs
  • Enables efficient usage of chemical additives, resulting in enhanced properties of fresh and hardened mortar
  • Uniform quality
  • Optimum specific surface area
  • Optimum fineness of grind
  • Uniform light colour

CRH Serbia recommends CEM I 42,5 R for production of dry mortars, because, in comparison to composite cement , it:

  • achieves rapid strength growth
  • projects later-age strength more easily
  • uses smaller quantity of cement
  • achieves more uniform quality

Application of cement type  CEM I 42,5 R in production of dry mortars

Raedy mixed dry mortars are admixtures whose production is based on cement CEM I 42.5 R, special chemical additives and fillers of a specific  granulometric composition. Ready mix dry mortars prepared with  CEM I 42.5 R are ready for immediate use and in order to be used, only addition of some water is required. Thanks to  specially adjusted quality, CEM I 42.5 R from CRH Serbia product range, properties of fresh and hardened mortar are in conformity with all requirements of appropriate standards. The quality of dry mortars prepared with CEM I 42.5 R have been confirmed through practice..

Dry admixtures for whose preparation cement type CEM I 42.5 R is recommended

  • Construction water impermeable adhesive for glueing ceramic tiles
  • Construction water impermeable adhesive for glueing styrofoam
  • Dry admixtures for concrete floors
  • Dry admixtures for finishing-filling grout lines
  • Dry mortars to be used for rebuilding
  • Dry mortars to be used for injecting
  • Plastering mortars
  • Masonry mortars
  • Ready mix mortars to be used for suffusing and filling joints, etc.

Technical assistance

For further information or assistance regarding the usage of our products, feel free to contact us at 0800 325 425

CONTACT

Sales Department

Belgrade and Vojvodina: +381 35 572 220
Central Serbia: +381 35 572 380
Southern Serbia: +381 35 572 377

Email: ivana.radovanovic@rs.crh.com